Inst. Manual Dryer Board WP35001153 (AP6008686) 35001153, DC41-00027A, 1122533, PS11741826.

IMPORTANT: 

• NEW PART NUMBER your old part number is no longer available, new part number fits old and new serials.
• The product could be a different color or shape, (internal item, color does not interfere with operation) 
• If you don't fix the original problem, the new item will be broken again. TERMINAL CONNECTORS or bad electric contact need fix it, cleaning and close terminal to better power contact.

TECHNICAL NOTE

• Control board are often misdiagnosed. or wrong diagnostic  or online fake videoif you don't fix the original problem, the new item will be broken again.
• Disconnect the power source to your dryer before you conduct this or any other repair. Either unplug the unit from the wall outlet, remove the appropriate fuse from the fuse box, or flip the appropriate breaker in the circuit breaker panel.
  
• When you finish the repair it, we recommend that you take a peek behind the dryer before fully pushing it back. It is a common mistake to push back the dryer too far which crushes the dryer vent. If you crush the vent, it will restrict air flow, and will reduce performance of the dryer — and may lead to a lint clog blocking the vent.
  

The Dryer Electronic Control Board Assembly controls the appliances operations, including drying time and temperature. If your dryer will not heat, be sure to check the thermal fuse before replacing this part. Note that this issue is often misdiagnosed; test the existing part with a volt/ohm meter to determine if it is truly defective before replacing it. Installing this assembly will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. 

VIDEO 1 SAMPLE How remove the control board and installation

VIDEO 2 TEST FUSE

VIDEO 3 TEST components and volts

VIDEO 4 Will Not Start - Door Switch Repair and Diagnostic