You new item or appliance has a AIR PRESSURE HOSE is very important in the installation process avoid small obstructions. (Frequently in the installations)
A-Blow the hose - See Picture- Avoid small obstructions
B-Cut ¼ Inches of the old hose- Avoid air leak
C-Push the hose in installation to the limit
If you try to fix your appliance do it yourself , or google search or youtube videos . it is frequently bought for mistakes for FAKE Youtube videos, but no problem we can help you
SOLUTIONS ERROR CODE 80% Pressure switch OR:
80% Pressure switch
5% Fuse or lid or door lock switch or both
5% Bad Electric Contacts and terminals - for vibrations, It is common for old models
5% water pump and hose obstructions or Dryer Ducts obstructions
5% Secondary Board or front board
ERROR CODE — Blow Hose before to install -SMALL OBSTRUCTION IN INSTALLATION PROCESS IN THE HOSE, IT will GIVING ERROR CODE AGAIN.
Make sure that there is air coming out of the other side of the hose. If there is no air coming through the other side of your hose, this means that there is most likely an obstruction and you will need to replace your hose!
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article