IMPORTANT:
- NEW PART NUMBER your old part number is no longer available, new part number fits old and new serials.
- The product could be a different color or shape, (internal item, color does not interfere with operation)
- If you don't fix the original problem, the new item will be broken again. TERMINAL CONNECTORS or bad electric contact need fix it, cleaning and close terminal to better power contact.
TECHNICAL NOTE
Disconnect the power source to your dryer before you conduct this or any other repair. Either unplug the unit from the wall outlet, remove the appropriate fuse from the fuse box, or flip the appropriate breaker in the circuit breaker panel.
When The pump was making noise, You need to replace both pumps. you had to remove the water bucket to get to the pumps which are easy to change out once there. It is easy to see what you have to remove to get to it. You can use the mirror and ratchet, extensions, 1/4 socket to remove screws. Tips - Remove the plastic door-inner to help working inside the bin. Also plug the drain because you will drop screws. Magnet sockets don't work on stainless steel. Later I found it is much easier to work inside the bin by pulling the entire unit out (shut off water and power, remove lower panel and disconnect drain tube). It sounds hard, but actually is easy. REMOVE THE TOP (4 screws). it stays connected because of wiring, but it allows full access and makes all kinds of repairs easy, especially pump replacement and even the circuit board behind the front panel buttons if you ever get to that point.
DIFFERENT CONNECTORS OR SIZE FOR MODEL AND SERIAL NUMBER:
SERIAL 36 New part number fits old Part Number AP7019076 , W11542868, WPW10489125, W10489125.
SERIAL 39 New part number fits old Part Number W11566407 (AP7187897) WP2313705, 2313705
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article