ONLY FOR CERTIFIED TECHNICIANS DISCLAIMER: NO RETURNS ALLOWED IF THE BAG OR BOX IS OPENED (Watermark in each item)
Buyer pays return shipping ($4.95 to $12.00 1st Class), 8-10 days refund time Approx.
IMPORTANT: Your old part number is no longer available, we ship new part #, perfect fit old and new serials, If you need help send picture of the old part #.
FIX THE ORIGINAL PROBLEM OR YOUR ITEM OR CONTROL BOARD WILL BE BROKEN AGAIN :Before to start replace the board
1-You need to clean the pump filter and check for blockages in the hoses
2-Locate the pressure switch and disconnect the small hose, blow out the hose to prevent hose clogging
3-you need to clean contact terminals of he item or control board and lid/ door switch
ERROR CODE — Blow Hose before to install -SMALL OBSTRUCTION IN INSTALLATION PROCESS IN THE HOSE, IT will GIVING ERROR CODE AGAIN.
Make sure that there is air coming out of the other side of the hose. If there is no air coming through the other side of your hose, this means that there is most likely an obstruction and you need to blow the hose
FIX THE ORIGINAL PROBLEM OR YOUR CONTROL BOARD WILL BE BROKEN AGAINis in:
See Pump Obstruction
See bad electric contact terminal or Door / lid Switch
Blow the hose of pressure switch
1-Make sure that there is air coming out of the other side of the hose, small obstruction in installation produce error code and the item will be broken again.
2-You need to cut ¼ inche the hose before you install it. Big Hole don’t allow a perfect seal and air leak
3- Now You can connect the hose, you can use the new one hose or old one hose, only if the hose is not broken.
IMPORTANT: Your old part number is no longer available, we ship new part #, perfect fit old and new serials, If you need help send picture of the old part #.
ERROR CODE OF BAD ELECTRIC CONTACTS
(frequently buy for mistakes or wrong diagnostics for fake youtube videos do it yourself, if your don’t have experiences you need clan terminal contact).
SOLUTIONS ERROR CODE 80% control board OR:
5% Fuse or lid or door lock switch or both
5% Bad Electric Contacts and terminals - for vibrations
5% water pump and hose obstructions or Dryer Ducts obstructions
5% Secondary Board
****** It is important to remember that vibrations in appliances generate bad electrical connections in your terminals, switch cables and connectors. Please remember to check that all your connections are correct before installing a new part. if you don’t fix the original problem the item will be broken again
IMPORTANT Before to replace the the board cleaning the electric contacts of the board, you can use thiner, alcohol or professional contact cleaner with screw driver or scalpel, check every contact in the board.
Spray electric cleaner in the electric contact and terminal
Clean with magnetic screwdriver in the electric contact and terminal
Rinse Electric Cleaner in the electric contact and terminal (homedepot)
ERROR CODE OF BAD ELECTRIC CONTACTS - SOLUTIONS
(frequently buy for mistakes or wrong diagnostic, or fake youtube videos)
SAMPLE VIDEO YOUTUBE:
Troubleshooting and Repairing the F11 Error similar models for different brand
Spray electric cleaner in the electric contact and terminal
Clean with magnetic screwdriver in the electric contact and terminal
Rinse Electric Cleaner in the electric contact and terminal
www.appliance-repair-manuals.org
see pictures, manuals and videos - ANW10006355X
TEXTING PICTURE WE CAN HELP - ADD ORDER NUMBER AND:
1-ORIGINAL PROBLEM 2-PROBLEM AFTER CHANGE THE NEW ITEM
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article